In the process of producing flooring, ceramic tiles and porcelain tiles, there may be minimal size variations. To obtain a uniform finish, the product undergoes a perfect cutting process at the edges, which guarantees exact dimensions of the parts allowing a precise alignment and the application with minimum joint of 1mm between the parts.Recognize when a product is rectified:
|Conventional||33 x 45||25 x 60||33 x 60||44,4 x 44,4||54,4 x 54,4||61 x 61|
|Rectified||32 x 44||24 x 59||32 x 59||43,8 x 43,8||53,4 x 53,4||60 x 60|
The Incepa glazed porcelain tiles are the only ones in Brazil with all lines certified by the CCB (Ceramic Center of Brazil), accredited body by INMETRO, strictly complying with the standards of conformity - NBR 15463 and ISO 13006
These products are composed of special raw materials. Due to the low water absorption (<= 0,5%) the porcellanatos have high mechanical resistance. Its surface is enamelled, allowing numerous prints in the pieces.
EN Natural Effect
Produced with Incepa's exclusive technology, this porcelain tile has uniformly colored mass, from the base to the surface. This technique allows the creation of products with different textures and reliefs, providing a Natural Effect to each piece. um Efeito Natural a cada peça.
•Usage GroupThe correct specification ensures good performance.
The criteria used for the classification of products in Groups of use are based on two main characteristics of the porcelains: wear resistance and resistance to risks under real conditions of application. Therefore, the choice of a product for a particular environment should take into account, in particular, the transferability of the environment, in order to guarantee the durability of the product. The analysis of these characteristics results in much more reliable data for the correct specification of the porcelain tiles. They are indicated for the following classes of condition of use.
Classes of Tonality Variation
Some series of porcelain tiles are produced with variations of tonality to reproduce the nuances of colors and textures of the natural elements. The customization of the pieces varies from V1 (uniform) to V4 (random), passing through V2 (weak) and V3 (moderate).
Varied reliefs between the pieces guarantee greater fidelity to natural products.Important points: Packing: are randomly packed with pieces of different reliefs; Store Exposure: expose the pieces with different reliefs side by side, so that consumers can observe the effect of the product; Applications:the pieces should be applied randomly to enhance their natural effect.
•Digital Printing Id
A Fingerprint high definition reproduces with fidelity the colors, nuances and designs found in the marbles, woods and natural stones. The fingerprint reaches the entire surface of the ceramic body, including uneven surfaces and reliefs.
They are partially polished, while in the same piece can be observed frosted and bright dots, resulting in a sophisticated finish.
•ABS (Adherence, Beauty and Safety)
Incepa with Roca technology, offers the solution for specific floors for outdoor areas. Products 30% adherent than those found in the market. Only Incepa has ABS technology for floors. Check out the advantages of ABS floors:
- Less harshness
- Greater practicality in cleaning;
- Suitable for indoor environments (box, around tubs, sinks) and outdoor environments
They are ceramic coatings of very low water absorption, not enameled and with a shiny surface. Due to these characteristics they are susceptible to risks and require special care in their maintenance, such as using neutral products (ph = 7,0) for cleaning. In the market there are products with great alkalinity and acidity to perform heavy cleaning, these, however, attack the surface of the product producing stains.
•Porcelain tile for Swimming pools
Laguna is the first porcelain tile specific to swimming pools. Pool products require strict technical characteristics. Its water absorption is less than 0,5%, which results in high mechanical resistance and low expansion by humidity. Differentials of porcelain tile Laguna:* Pastilled effect;
* Board of small 1mm;
* Low water absorption;
* Allows the use of common grout;
* Resistance to chlorine;
* Ease of cleaning;
* Special pieces for curved pools. curvas.
•Minimum Joints (Floors)
•What is Flat Edge?
1mm gasket. Rectified Effect.
Developed exclusively by Incepa, the Flat Edge presents its surface with greater flatness, allowing the decoration to reach the piece in its entirety, eliminating the traditional white border and offering better finish. This technique is applied to coatings in 33 × 45 and 33 × 60 formats without relief and provides the effect of rectified product after application.
•What is Dry Board?
Dry Seal. Tablet Effect.
These products should be applied without space between the parts, as it is the Dry Board which provides the effect of a wet plate, where the splice between the pieces is not noticeable.
* But attention: to obtain this effect all grooves of the parts must be grooved.
•Digital Printing Id
A high definition digital print faithfully reproduces the colors, nuances and designs found in marbles, woods and natural stones. The fingerprint reaches the entire surface of the ceramic body, including uneven surfaces and reliefs.
Vitrified Mosaics C + V
Ceramic + Glass
The C + V tiles have a ceramic base and glazed surface. With this they present important differences regarding the glass tablets like:
- Glue effect with vitrified surface;
- Ceramic base;
- Same thickness of Incepa coatings;
- Depending on the base being ceramic, filling with dough for leveling these parts dispenses mortar and special workmanship. Its application must be made with traditional ACI mortar;
- Unlike Vridro inserts, C + V tiles do not change color;
- Available in plaques and mosaics, which allow application on curved surfaces;
- Screen mosaics are indicated for indoor and outdoor areas.
30% thinner. 100% more practical. Ease and economy for your retirement.
With a thinner 30% thickness than conventional products, this 6mm only coating allows application in new works and old coatings.
For applications on old coatings use special mortar for coating;
For application to plastered walls, use traditional ACI mortar.